|
XCEL In-ground Safety Pool Fence Post: Straight / 90 degree on both sides
Quantity:
Price / Each:
$32.00 |
XCEL In-ground Safety Pool Fence Post: 1 side Straight & 1 side > or < 90 Degree Turn
Quantity:
Price / Each:
$32.00 |
XCEL In-ground Safety Pool Fence Post: Turn > or < 90 Degree on both sides
Quantity:
Price / Each:
$32.00 |
 
- In ground installation posts are 6' or 7' for residential /commercial grade
- Includes 2 sets of fence connecting brackets
- Height / grade is matched to your fence by selecting the correct option.
- Residential posts are 2" sq, 16 gauge steel
- Commercial posts are 2-1/2" sq, 14 gauge steel
|
|
|
The safety pool fence posts are manufactured from G60 galvanized steel with a zinc epoxy coating and a polyester TGIC powder coating. Posts are
set at either end of a panel. Select the install option shown above which best matches your need:
A. The fence is entering and leaving the post straight or at a 90 degree turn.
B. The fence is coming to the post on a straight line and coming off the opposite side at an angle that is greater than or less than 90 degrees.
OR
C. The fence is entering and leaving the post at an angle that is greater than or less than 90 degrees on both sides.
Drop down options above are for in-ground residential or commercial grade in either 6' post (4' tall installed) or 7' post (5' tall installed). In
ground installation can be accomplished with a core drill and a 3" core bit to in ground sink the posts; in ground leave 2' to be sunk in the ground.
Residential posts are constructed of 16 gauge steel (2" sq), and commercial posts are constructed of 14 gauge steel (2-1/2" sq).
|
|
XCEL Surface Mount Safety Pool Fence Post: Straight / 90 degree on both sides
Quantity:
Price / Each:
$33.00 |
XCEL Surface Mount Safety Pool Fence Post: 1 side Straight & 1 side > or < 90 Degree Turn
Quantity:
Price / Each:
$33.00 |
XCEL Surface Mount Safety Pool Fence Post: Turn > or < 90 Degree on both sides
Quantity:
Price / Each:
$33.00 |
Constructed of G60 galvanized steel with zinc epoxy coating and powder coated finish
1-3/8" sq, 18 gauge steel frame and 5/8" sq, 19 gauge steel pickets (residential)
1-1/2" sq, 16 gauge steel frame and 3/4" sq, 18 gauge steel pickets (commercial)
Magna-Latch self-latching latch
Tru-Close self-closing hinge
Customizable design
5/8" sq.
|
|
|
The safety pool fence gate is composed of a top and bottom rail, two gate ends, and a number of vertical pickets. All the components are
designed to be customizable to the appropriate size by simply cutting them to fit the size required (National Pool Fence recommends a pool fence gate be
less than 4' long), while we supply the appropriate number of pickets. The frame is made of 1-3/8" sq. (18 gauge steel), and the pickets are made of
5/8" sq. (19 gauge steel), G60 galvanized steel and coated with zinc epoxy and a polyester TGIC powder coat finish.
The safety fence gate is secured by self-closing hinges and a self-latching latch. These two pieces of hardware are imperative for baby pool
fencing, because most incidents occur when children are not supposed to be around the pool. Self-closing, self-latching gates ensure that gates are not
accidentally left open for an accident. The Magna-Latch self-closing latch is magnetically triggered, so it won't be jammed by small debris, and will latch
automatically. Magna-Latch is tested to 400,000 cycles to ensure that it is consistently reliable for a lifetime of use. These latches are also adjustable
for 3/8" to 1-7/16" gap. Tru-Close hinges are resistant to sticking because they do not require lubrication, and are easily adjusted with a screwdriver,
so maintenance is simple and convenient. To ensure the most reliable product, Tru-Close hinges are tested to 50,000 cycles. These hinges and also be
installed on gates up to 55 lbs.
|
|
Gates: pre fumished with true close hinges and magna
latch
XCEL Self-Closing, Self-Latching Safety Pool Fence Gate
Quantity:
Price / Each:
$100.44
Includes top and bottom rails, and vertical pickets.
Bias-able (accommodates racking for installation on an incline)
Residential rails are 1-3/8" sq
Commerical rails are 1-1/2" sq
Residential pickets are 5/8" sq
Commercial pickets are 3/4" sq
Residential panel is 4'x8'
Commercial panel is 5'x8'
|
|
|
The safety pool fence panels are constructed of a top and bottom rails and a number of vertical pickets. The top and bottom rails are designed to
be customizable to the appropriate size simply by cutting them to fit the size required, while we supply the appropriate number of pickets according to
the measurements provided. These safety pool fences can be installed on an incline up to 36" because they are bias-able and can accommodate
racking. This keeps the bottom rail at the same distance from the ground as it follows the incline. Both the residential and the commercial grade fencing
are constructed of G60 galvanized steel and coated with zinc epoxy and a polyester TGIC powder coat finish. The pool fencing panels are 4' tall for
residential fencing, or 5' tall for commercial grade fencing (select option).
Residential
The top and bottom rails are 1-3/8" sq. (18 gauge steel) and the pickets are 5/8" sq. (19 gauge steel). Each panel is 4'x8', but can be cut down to a
smaller size to accommodate the specific needs of individual installations.
Commercial
The top and bottom rails are 1-1/2" sq. (16 gauge steel) and the pickets are 3/4" sq. (18 gauge steel). Each panel is 5'x8', but can be cut down to a
smaller size to accommodate the specific needs of individual installations.
|
|
|
NationalPoolFence.com, the leading source for mesh and steel pool fencing
| |